Gasboy CFN III Fuel Management System PA-DSS - Manual (Page 10)

Getting Started Remote Access
Page 6 MDE-4870A CFN III Fuel Management System PA-DSS Implementation Guide Version 3.6 · June 2010
7 Select On resume, password protect.
8 Click OK.
9 Repeat step 1 to 8 for each Administrative level user account.
Administrator Desktop
The newly created administrator user’s desktop will not look exactly like the default
“Administrator” user’s. To change to default settings, proceed as follows:
To change the settings for the Control Panel, proceed as follows:
1 Click on Start > Settings > Control Panel.
2 Select Switch to classic view.
To change the settings for the Start Menu, proceed as follows:
1 Click on Start > Settings > Control Panel > Taskbar and Start Menu Properties > Start
Menu.
2 Select Classic Start Menu.
To change the settings for the desktop icons, proceed as follows:
1 Right-click on the desktop and select Properties > Display Properties > Desktop.
2 Select Customize Desktop.
3 Clear the options My Documents, My Network Places, and Internet Explorer icons.
To resize the SC3 Window to default settings, proceed as follows:
1 Right-click title bar of SC3 window.
2 Select Properties.
3 Set Window Size - Height to 26.
Remote Access
Two-factor authentication is required for remote access into the CFN III system by employees,
administrators, and third-party.
Passwords and access by vendors for remote maintenance must be enabled only when
explicitly required, and must be disabled thereafter. Best practice is to only enable this access
when access to the system has been requested by the vendor. Remote access is provided only
to users with permission level 9 or lower. Remote access is not provided for users with
permission level 10 or higher.