Gasboy FleetCor Dual Special Card Handler - Manual (Page 13)

MDE-4310B CFN Series FleetCor Dual Network Special Card Handler V1.0.1 · April 2007 Page 9
SYS_PAR Configuration Configuration
4 – Configuration
SYS_PAR Configuration
Parameter Name Parameter Value
Page 1: System Parameters
System ID 1220
PIN Key Call Gasboy
Lockout Bit mapped, 7 digits, on disk, max card 9999999
Page 2: Club Card Format - Field Widths
Digits in System ID 4
Digits in Account # 19
Digits in Expiration Date 4
Digits in Limitation Code 1
Digits in Authorization Code* 0
Digits in Price Level 1
Digits in Restriction Code 1
Digits Used in PIN Calculation 9
Page 3: Club Card Formats - Offsets
Limitation Code Offset 0
Authorization Code Offset 1
Price Level Offset 3
Restriction Code Offset 4
PIN Calculation Offset 0
Extra Card Digit Offset 5
Club Bit-mapped Account Offset 0
Page 4: Reader Verification and Miscellany
Use remote verification** Club credit***
Check PIN None
Page 5: Console Verification
Use remote verification** Club credit***
Check PIN None
Page 8: Serial Port Configuration
Send Request to host handler Credit
Page 11: Transaction Miscellany
CFN PIN Unencrypted* Yes
Send transactions to CFN host* Club
Note: Also specify credit only if a bank network is not being
used and T-Chek or other credit cards are being
authorized through FleetCor Network.