Gasboy Attendant Card Handler 2003 - Manual (Page 3)

Special Card Handler Attendant Special Handler 002 1
03/12/03 Gasboy CFN Series
002
Attendant Special Handler
Overview
This special handler adds the ability to track credit sales by full serve attendant number. The
Attendant Special Handler can be configured to monitor transactions from the consoles and
readers. This special handler is only available on CFN3.
Attendant cards are GASBOY access cards containing the attendant ID in the last 2 digits of
the account field. The handler requires an attendant card to be swiped following any card from
the island and/or consoles. It will check the system ID, the length of account data, and the length
of expiration date on the attendant card.
Site lockout will be checked for the attendant card if Club Cards are configured to be
checked in SYS_PAR. The Attendant Special Handler sets the sale limitation, authorization,
restriction and allocation number to that of the attendant card. After cards are swiped, the sale
will proceed as a typical sale based on the site's configuration.
Procedure
The attendant swipes the customer card, swipes their attendant card, then completes the fueling.
For all credit sales, the attendant number will be stored as the clerk number.
CASH purchases are charged to the Attendant’s card as if it were a club card. This will be
charged as tender 005 with the Attendant’s number as the clerk number.
Attendant responsibility can be traced using the Attendant reports configured to use the clerk
number as the attendant number. The standard clerk reports can also be used.
Other tools include:
• prattend -c (this is used by the standard attendant package)
• PJ -u
• prtender -c
Please see your Point of Sale Shift Change Manual for more information.