Gasboy M09677B015 - Manual (Page 20)

Installing the NR-H Nozzle Reader (M09677B015) Kit
Page 20 MDE-5075 NR-H Nozzle Reader (M09677B015) Kit Installation Instructions · January 2013
24 Double-back the tip of the clamp into the RT slot and snuggly tighten the clamp with a

screwdriver until the clamp visibly compresses the RT and mounting foot. Remove the tie
wrap in the other RT slot and replace it with the second hose clamp in the same way as the first
as shown in
Figure 27 . After completing, the RT must look like Figure 28 .
Figure 27: Tightening Hose Clamps
Figure 28: Completed Assembly
The installation of NR-H Nozzle Reader (M09677B015) kit is now complete.
Hose Clamp