Gasboy 9100Q Series - Manual (Page 5)

05/05/03 1-1
Section 1
INTRODUCTION
PURPOSE
The GASBOY Series 9100Q Pumps and Dispensers Installation/Operation Manual is provided to
assist the installer in installing and operating the unit. This manual should be supplied to the
electrician prior to the installation of conduit and wiring to ensure the Series 9100Q dispensing unit
is installed properly. Faulty installations are the major cause of unit malfunctions. The unit must
be installed and operated as described in this manual to ensure the reliability and proper operation
of the Series 9100Q dispensing unit. In addition to installation information, this manual contains
warnings, safeguards and procedures on the use and care of the Series 9100Q pumps and
remote dispensers. Be sure to leave this manual with the pump/dispenser owner after the
installation is complete.
☎
Customers and installers having any questions pertaining to the installation should
contact their GASBOY distributor.
GENERAL DESCRIPTION
The GASBOY Series 9100Q dispensing units are UL-listed and are available in a self-contained
(suction pump) package or in a remote-controlled (dispenser) package. Both packages offer a
variety of models which are available as single hose outlets or dual hose outlets (with single or
dual product capability). The self-contained models are available in standard speed, up to 15
GPM; in high speed, up to 22 GPM; or in a single hose model with high capacity speed, up to 40
GPM. The rate of delivery for the remote-controlled packages will vary according to the size of the
submersible pump. The delivery rate of both packages will also vary depending upon installation
conditions and added accessories.
The Series 9100Q offers the following features:
At a glance:
Suction Pumps Remote Dispensers Features
Standard
Speed
Models 9152Q
9152QTW1
9152QTW2 9152QX
9152QXTW1
9152QXTW2 Inlet: 1-1/2" NPT
Discharge: 3/4" NPT (female threads)
Motor: 3/4 HP continuous duty
Valves (when used): 3/4"
High
Speed
Models 9153Q
9153QTW2
9153QTW1M 9153QX
9153QXTW1
9153QXTW2 Inlet: 1-1/2" NPT
Discharge: 1" NPT (female threads)
Motor: 3/4 HP continuous duty
Valves (when used): 1"
Super
Speed
Model 9140Q 9140QX Inlet: 2" NPT
Discharge: 1-1/4" NPT (female threads) with
1-1/4"x1" reducer bushing
Motor: two 3/4 HP continuous duty
Valves (when used): 1-1/2"