Gasboy 9700E - Manual (Page 5)

03/07/03 1
PARTS LIST
USING THIS PARTS LIST
This manual lists parts information for the Gasboy Series 9753E pumps and dispensers. Using
part numbers when ordering will expedite your order and reduce the possibility of the wrong parts
being shipped. When ordering replacement parts, be sure to give the complete name and part
number as shown in the appropriate parts list. It is also helpful to supply the serial number of the
equipment.
This manual is arranged from general to specific, presenting the complete unit first, then the
chassis breakdowns, then further breakdowns of the individual components (i.e., dial enclosures,
lamp assemblies, discharges, etc.). If you can’t find the part you need from the chassis drawing,
be sure to check the appropriate parts breakdown for your model.
Procedures requiring disassembly of portions of the pump/dispenser should be performed by
competent service personnel. Do not depend upon the repair service of a general mechanic
unless he is thoroughly familiar with the mechanism. Gasboy has a distributor network which
services fuel dispensing equipment and management systems in every section of the country.
WARNING:
To reduce the risk of electrical shock when servicing, turn off and lock out all power to the
pump/dispenser. In submersible pump applications, turn off and lock out power to the
submersible pump and any other pumps/dispensers which use that submersible pump. AC power
can feed back into a shut-off dispenser when dispensers share a common submersible pump or
starter relay. Always turn off and lock out all power to the dispenser and the submersible pump at
the master panel and close any impact valve before performing maintenance or service to the
dispenser, including the changing of any fuel filters or strainers. Also block islands so no vehicles
can pull up to the dispenser when the dispenser is being worked on.