Step 5, Step 6 – Gasboy 9800A Atlas User Manual

Page 6

Text mode
Original mode

Installing the Kit

Atlas

™

and TopKAT

™

are trademarks of Gasboy International. Gasboy

is a registered trademark of Gilbarco Inc. Phillips

is a registered

trademark of The Phillips Screw Co.

http://www.gasboy.com

· Printed in the U.S.A.

MDE-4733 TopKAT™ Upgrade Kit For Atlas™ 9800A · March 2008

Use the four 1/4-20 Bolts, Lock Washers and Flat Washers to install the Support Base from
inside the unit.

Attach the Gasket (M07800B001) to the top surface of the Support Base, aligning the 8 MTG
holes and adhesive side to the Support Base.

Install the cables and the TopKAT to the unit. Refer to MDE-4319 TopKAT Installation
Manual for instructions.
Note: Four 1/4-20 bolts, Lock washers and Flat washers are provided to install the TopKAT.