GAI-Tronics 300 Series RED ALERT Emergency Telephone Manual - Manual (Page 39)

P UB . 42004-438K
300 S ERIES E MERGENCY T ELEPHONE M ANUAL P AGE
37 of 45
f:\standard ioms - current release\42004 instr. manuals\42004-438k.doc
01/15
Americans with Disabilities Act (ADA) Programming
The ADA features provide the following benefits:
 C
ALL R ECEIVED W HEN L IT indication - This lamp provides indication to hearing-impaired
individuals that the emergency call has been answered.
 The Location Identification Code - This feature enables security personnel to quickly and easily
locate an individual in trouble.
 DTMF Call Disconnect - Enables the security operator to disconnect the call by pressing ##.
N OTE : These features do not apply to the Model 392-001.
Table 9. Americans with Disabilities Act (ADA) Programming
Feature Key
Sequence
Description
Default
DTMF
Disconnect
Option # 1 8 L This option controls the DTMF “##” disconnect feature.
To enable, set L=1.
To disable, set L=0.
1 (Enabled)
Location
Identification
ID Setup # 1 3 L N N N This option enables and stores the three-digit location
identification ID number.
To enable the ID feature, set L=1.
To disable the ID feature, L=0.
Enter the three-digit location identification code in the
sequence N N N.
Example: To enable the location ID feature and store the
three-digit ID code 357, enter # 1 3 1 3 5 7.
To disable the location ID feature, enter # 1 3 0 0 0 0.
N
OTE
: The ADA options must also be enabled.
No default
setting. The
user must
complete this
step to have the
identification
code
transmitted.
Extended Strobe Operation (Requires External Power Supply)
Output 1 can be programmed for extended operation (remain closed) for up to 255 minutes (in 1-minute
increments) after the emergency call ends.
Table 10. Extended Strobe Operation
Feature Key
Sequence
Description
Default
Extended
Strobe
Operation # 2 5 N N N Sets the duration of the activation of the Output 1 contact starting
at the end of a call. Use entries 001–255, representing 1 minute to
255 minutes in 1-minute increments.
Use 000 to disable this feature.
To set a duration of 7 minutes, enter
# 2 5 0 0 7 .
0 0 0
(Disabled)