GAI-Tronics LE200-RM Rack-Mount Page/Party Line Extender - Manual (Page 9)

Pub. 42004-392G
M ODEL LE200-RM R ACK -M OUNT P AGE /P ARTY
®
L INE E XTENDER P AGE 7 of 56
e:\standard ioms - current release\42004 instr. manuals\42004-392g.doc
09/14
Features and Functions
The Model LE200-RM Page/Party ® Line Extenders provide the following features between Page/Party ®
system cables.
Page Line Audio Transmission
A pair of Model LE200-RMs provides page line audio transmission between two Page/Party ® system
cables. This transmission is half-duplex operation.
When the Line Extender detects a peak audio level equal or above a
Peak Voltage Level Detection
Threshold
, it immediately switches audio “on” in that direction for the
Transmission Direction Hold
Time.
Audio from the other direction is muted and ignored during that time. Audio is not switched “off”
until it is continuously below the Peak Voltage Level Detection Threshold for the Transmission Direction
Hold Time. The DIP switch SW2 positions 5–7, located on the Main PCBA, selects Peak Voltage Level
Detection Threshold and Transmission Direction Hold Time. Refer to Figure 6 for the location of switch
SW2 on the Main PCBA and Table 1 and Table 2 below for setting options.
Table 1. Transmission Direction Hold Time Settings on Main PCBA
SW2-5 SW2-6 Transmission Direction Hold Time
Open* Open * 1280 milliseconds
Closed Open 640 milliseconds
Open Closed 160 milliseconds
Closed Closed 40 milliseconds
N OTES : 1. Changes to this parameter take effect without cycling power.
2. *Indicates default position.
Table 2. Peak Voltage Level Detection Threshold on Main PCBA
SW2-7 Peak Voltage Level Detection Threshold
Open* −12 dB relative to nominal
Closed −24 dB relative to nominal
N OTES : 1. Changes to this parameter take effect without cycling power.
2. *Indicates default position.