Foxconn 865M06-G-6EKS - Manual (Page 80)

Chapter 4 Driver CD Introduction
72
865M06 Series User Manual
Attaching Speakers
To perform multichannel audio operation, connect multiple speakers to the system.
You should connect the same number of speakers as the audio channels you will
select in the software utility.
2-Channel Analog Audio Output
The audio connectors on the rear panel already provide 2-channel analog audio
output. The rear panel’s audio connectors can be transformed to 4-/6-channel
analog audio connectors automatically when you select the correct setting in the
software utility. For information about the setting, refer to Selecting 4- or 6-Chan-
nel Setting later in this section.
Make sure all speakers are connected to Line-out connectors. Diverse connector
configurations for 2-, 4- and 6-channel using rear panel connectors are described
below:
2-Channel Analog Audio Output
Line-out (Front channels)
Line-in
Microphone
Description: Line-out, Line-in and Microphone functions all exist under 2-channel
configuration.