Foxconn 865M06-G-6EKS - Manual (Page 63)

Chapter 3 BIOS Description
55
865M06 Series User Manual
B. With RAID Function
Onchip IDE Menu
SATA Mode (Default: IDE)
This option is used to set the Serial ATA Mode. The available setting values
are: IDE, RAID. If you want to use RAID function, make sure that SATA En-
hanced Mode is selected in On-Chip Serial ATA option and set this item with
“RAID” value.
On-Chip Serial ATA (Default: Auto)
This option is used to set the On-chip Serial ATA function. When it is set to
Disabled, the function will be disabled; when it is set to Auto, the BIOS will
enable the function automatically; with it set to Combined Mode, four HDDs at
most will be supported; with it set to Enhanced Mode, six HDDs at most will be
supported (for those under Windows 2000 and Windows XP only); with it set to
SATA Only, only the S-ATA HDD can be used.
Serial ATA Port 0/1 Mode (Default: Primary Master\Secondary Master)
This option is used to set the Serial ATA Port 0/1 Mode—with it set to Primary
Master/Slave, the Primary IDE cannot be used, supporting the IDE/SATA boot;
with it set at Secondary Master/Slave, the Secondary IDE is unapplicable,
supporting the IDE/SATA boot; with it set at Primary/Secondary Master, the
SATA HDD can act as the primary or secondary drive in such case when the
SATA Only is selected; with it set at SATA 0/1 master, it is used to select the
SATA HDD port when the SATA Enhanced Mode is selected.