Foxconn 865M06-G-6EKS - Manual (Page 14)

Chapter 1 Product Introduction
6
865M06 Series User Manual
ATX 12V connector
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP 8X/4X mode
graphic card for 3D graphical applications.
CPU socket
A 478-pin surface mount, Zero Insertion Force (ZIF) Socket for the Intel ®
Pentium ® 4 processor. Supports 800/533/400 MHz system bus and allows up
to 6.4GB/s data transfer rates.
North Bridge controller
The Intel ® 865G/GV Graphics Memory Controller Hub(GMCH) and the Intel ®
865PE Memory Controller Hub(MCH) provide the processor interface with 800/
533/400 MHz frequency, system memory interface at 400/333/266MHz
operation, and 1.5V AGP interface that supports AGP 3.0 specification including
8X Fast Write protocol, the GMCH provides an integrated graphics accelerator.
DDR DIMM slos
These two 184-pin DIMM slots support up to 2GB system memory using
unbuffered non-ECC PC3200/2700/2100 DDR DIMMs.
ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
Super I/O
The Winbond W83627HF Low Pin Count (LPC) interface provides the commonly
used Super I/O functionality. The chip supports a high-performance floppy disk
controller for a 360K/720K/1.44M/2.88M floppy disk drive, a multi-mode parallel
port, two serial ports, the mouse and keyboard interface and the LPC (Low Pin
Count) interface.
1
2
3
4
5
6
7