Foxconn 865M06-G-6EKS - Manual (Page 45)

Chapter 2 Installation Instructions
37
865M06 Series User Manual
Clear CMOS Jumper: JP1
This motherboard uses the CMOS RAM to store all the set parameters. The CMOS
can be cleared by removing the CMOS jumper.
How to clear CMOS?
1. Turn off the AC power supply and connect pins 1 and 2 together using the
jumper cap.
2. Return the jumper setting to normal (pins 2 and 3 together with the jumper cap).
3. Turn the AC power supply back on.
Normal
Status
(Default)
Clear CMOS Jumper
Clear CMOS
1
3
2
1
3
2
1. Disconnect the power cable before adjusting the jumper settings.
2. Do not clear the CMOS while the system is turned on.
Warning: