Foxconn 865M06-G-6EKS - Manual (Page 19)

Chapter 2 Installation Instructions
11
865M06 Series User Manual
CPU
This motherboard supports socket 478 CPU with a FSB 400/533/800 MHz and
Hyper-Threading technology.
Installation of CPU
Follow these steps to install a CPU.
1. Unlock the socket by pressing the
lever sideways, then lift it up to a 90 0
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
3. When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Cut edge
90
°
Gap in the base
Push down the socket
lever to secure the CPU.
Attention:
The CPU pins must be properly aligned with the holes in the socket,
otherwise the CPU may be damaged.