Foxconn 865M06-G-6EKS - Manual (Page 37)

Chapter 2 Installation Instructions
29
865M06 Series User Manual
Wake-Up On LAN: WOL
Through the Wake-Up On LAN function, a wake event occurring from the network
can wake up the system. To utilize this function, please be sure an ATX 12V
power supply with a 5VSB line capable of delivering a current of at least 1A, and
a LAN adapter which supports this function. Then connect the header to the rel-
evant connector on the LAN adapter, set “Wake up by PCI Card” to enabled in the
“Power Management Setup” section of the CMOS Setup. Save and exit, then
boot the operating system once to make sure this function takes effect.
5V
_SB_SYS
GND
WOL
1
LAN wake up