Foxconn 865M06-G-6EKS - Manual (Page 62)

Chapter 3 BIOS Description
54
865M06 Series User Manual
On-Chip Primary PCI IDE (Default: Enabled)
Use this item to enable or disable the Primary PCI IDE channel that is inte-
grated on the motherboard.
IDE Primary/Secondary Master/Slave PIO (Default: Auto)
These four items let you assign which kind of PIO (Programmed Input/Output)
is used by IDE devices. Choose Auto to let the system auto detect which PIO
mode is best or select a PIO mode from 0-4.
IDE Primary/Secondary Master/Slave UDMA (Default: Auto)
Ultra DMA technology provides faster access to IDE devices. If you install a
device that supports Ultra DMA, change the appropriate item on this list to
Auto. The available setting values are: Disabled and Auto.
On-chip Secondary PCI IDE (Default: Enabled)
Use this item to enable or disable the Secondary PCI IDE channel that is
integrated on the motherboard.
On-Chip Serial ATA (Default: Auto)
This option is used to set the On-chip Serial ATA function. When it is set to
Disabled, the function will be disabled; when it is set to Auto, the BIOS will
enable the function automatically; with it set to Combined Mode, four HDDs at
most will be supported; with it set to Enhanced Mode, six HDDs at most will be
supported (for those under Windows 2000 and Windows XP only); with it set to
SATA Only, only the S-ATA HDD can be used.
Serial ATA Port 0/1 Mode (Default: SATA 0 Master/SATA 1 Master)
This option is used to set the Serial ATA Port 0/1 Mode—with it set to Primary
Master/Slave, the Primary IDE cannot be used, supporting the IDE/SATA boot;
with it set at Secondary Master/Slave, the Secondary IDE is unapplicable,
supporting the IDE/SATA boot; with it set at Primary/Secondary Master, the
SATA HDD can act as the primary or secondary drive in such case when the
SATA Only is selected; with it set at SATA 0/1 master, it is used to select the
SATA HDD port when the SATA Enhanced Mode is selected.