Foxconn 865M06-G-6EKS - Manual (Page 65)

Chapter 3 BIOS Description
57
865M06 Series User Manual
POWER ON Function (Default: BUTTON ONLY)
This option is used to set the power on method for your PC. Setting values
include: Hot KEY, Mouse Left, Mouse Right, Any KEY, BUTTON ONLY and
Keyboard 98.
Hot Key Power ON (Default: Ctrl-F1)
When the POWER ON Function set to Hot KEY, use this item to set the hot
key combination that turns on the system. The available setting values are:
Ctrl+F1-F12.
Onboard FDC Controller (Default: Enabled)
This option is used to set whether the onboard FDC controller is enabled.
The available setting values are: Disabled and Enabled.
Onboard Serial Port 1/2 (Default: 3F8/IRQ4 / 2F8/IRQ3)
This option is used to assign the I/O address and interrupt request (IRQ) for
the onboard serial port 1/2.
Note: Do not try to set the same values for serial ports 1 and 2.
UART Mode Select (Default: Normal)
Use this option to select the UART mode. Setting values include Normal,
IrDA and ASKIR. The setting value is determined by the infrared module in-
stalled on the board.
Super IO Device Menu