Foxconn 865M06-G-6EKS - Manual (Page 114)

Appendix
106
865M06 Series User Manual
1. Choose Create RAID Volume and press to enter. Press to
switch to RAID Level item, and then use Up and Down arrow keys to select
RAID0 (Stripe), pressing confirms.
2. Use Up and Down arrow keys to select desired strip size when enter Strip
Size manu. The available values range from 4KB to 128KB. The strip value
should be based on the planned drive usage. Some suggested selections
are listed below. The default selection is 128KB.
16K_Best for sequential transfer
64K_Good general purpose strip size
128K_Best performance for most desktops and workstations
3. Press the key after the Create Volume prompt appears to create
the array. Press the key after the prompt to confirm this selection.