Foxconn 865M06-G-6EKS - Manual (Page 20)

Chapter 2 Installation Instructions
12
865M06 Series User Manual
1. Locate the CPU retention mecha-
nism base (surrounds the CPU
socket).
3. Attach the fan to the base.
Installation of CPU Fan
New technology allows processors to run at higher and higher frequencies. To
avoid problems arising from high-speed operation, for example, overheating, you
need to install the proper fan. The following procedures are provided for refer-
ence only, please refer your CPU fan user guide to install it.
2. If required, apply a light coating
of silica gel to the top of the CPU.
NOTE: The CPU heatsink may have a
pre-applied thermal compound. In that
case, the silica gel is not required.
4. Connect the power fan’s power
cable to the appropriate 3-pin
connector on the motherboard.
Note :
Excessive temperatures will severely damage the CPU and
system. Therefore, make sure that the cooling fan works normally at
all times in order to prevent overheating and damaging to the CPU.