Denso BHT-100Q User Manual
Page 94
78
Selecting "1: BARCODE" on the TEST menu calls
up the screen shown at left.
Actually read bar codes with the BHT-100B and
check the read data displayed on the LCD.
Upon completion of bar-code reading, the BHT-
100B beeps, turns on the indicator LED in green,
and displays the read data together with the bar-
code type and the number of data digits.
To return to the TEST menu, press the C key.
Number of digits of the bar code
Data
Listed below is a table showing the relationship between the bar-code types and the
identifier letters to be displayed on the LCD.
Bar-code type
Bar-code Type
ID Letters
EAN-13, UPC-A
A
EAN-8
B
UPC-E
C
Standard 2of5 (STF)*
H
Interleaved 2of5 (ITF)*
I
Codabar (NW-7)*
N
Code 39
M
Code 93
L
Code 128
K
EAN-128
W
* The minimum number of digits to be read depends on
the scanning parameter setting. (Refer to [4.4].)
⇓
BHT-100B