Denso BHT-100Q - Manual (Page 77)

61
Chapter 2. Getting Started the BHT and System Mode
Selecting "4: BARCODE" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
1 INVERT : Activates or deactivates the
black-and-white inverted la-
bel reading function.
2 DECODE LEVEL : Sets the decode level.
3 MARKER : Sets the marker ON/OFF
mode.
4 ITF : Sets the minimum number of
digits to be read for ITF.
5 STF : Sets the minimum number of
digits to be read for STF.
6 CODABAR : Sets the minimum number of
digits to be read for Codabar.
Select a desired item by using the numerical keys
or M1 and M2 keys, and then select a desired
setting by using the SF+M1 and SF+M2 keys.
To increase the decode level, press the SF+M2
keys; to decrease it, press the SF+M1 keys.
To increase the number of digits to be read for ITF,
STF and Codabar, press the SF+M2 keys; to de-
crease it, press the SF+M1 keys.
Press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
BHT-100B
Black-and-white inverted label reading function (INVERT)
This function makes it possible to read white bars on a black background.
Activating this function might increase the frequency of bar-code reading errors.
This function can usually be set to OFF.
DECODE LEVEL
You may set the decode level. Decreasing the level value increases the bar-code
reading efficiency, but the BHT might misread low-quality bar codes (split or stained).
To the contrary, increasing the level value decreases the bar-code reading efficiency,
but it will diminish the possibility of misreading.
The setting range of the level value is from 1 to 9 and the default is 4.