Denso BHT-100Q - Manual (Page 84)

68
[4.5-3] Setting the interface port
Selecting the "3:COM PORT" on the SET COM menu
calls up the screen shown at left.
Highlighted is the current setting.
1 BASIC: Selects the optical or direct-
connect interface port to be
used
for user programs
written in BHT-BASIC
(OPEN "COM:").
2 SYSTEM MODE: Selects the optical or direct-
connect interface port to be
used
for downloading or
uploading files in System
Mode.
Select a desired item by using the numerical keys
or M1 and M2 keys, and then select a desired
setting by using the SF+M1 and SF+M2 keys.
To return to the SET COM menu, press the C key.