Denso BHT-100Q - Manual (Page 87)

71
Chapter 2. Getting Started the BHT and System Mode
[4.6] Defining the functions of the shift key, magic keys, and
function keys
Selecting the "6:KEY" on the SET SYSTEM menu
calls up the screen shown at left.
Highlighted is the current setting.
1 SHIFT KEY: Switches to the shift key defini-
tion screen.
2 M1 KEY: Switches to the M1 key definition
screen.
3 M2 KEY: Switches to the M2 key definition
screen.
4 M3 KEY: Switches to the M3 key (left-hand
trigger switch) definition screen.
5 M4 KEY: Switches to the M4 key (right-
hand trigger switch) definition
screen.
6 FUNC KEY: Switches to the function key ON/
OFF screen.
Select a desired screen by using the numerical
keys or M1 and M2 keys, and then press the ENT
key.
To return to the SET SYSTEM menu, press the C
key.
Selecting the "1:SHIFT KEY" on the SET KEY menu
calls up the screen shown at left.
Highlighted is the current setting.
1 Nonlock: Shifts the keypad only when the
SF key is held down.
2 Onetime: Shifts only one key pressed im-
mediately after the SF key is
pressed. (The following keys will
not be shifted.)
Select a desired setting by using the numerical
keys or M1 and M2 keys, and then press the ENT
key. The screen returns to the SET KEY menu.
Defining the function of the shift key