Denso BHT-100Q - Manual (Page 114)

98
■ Problem
Downloading has failed.
■ Solution
To retry downloading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Subsection
2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.
⇓
[8.2] Uploading the BHT system parameter file
Selecting "2:UPLOAD" on the SYSTEM PARAM-
ETER transfer menu calls up the screen shown at
left. With this screen displayed, the BHT waits for
the BHT system parameter file to be uploaded.
While the uploading operation is in progress, the
screen shown at left is displayed indicating the file
name and the number of sent records/the total
number of records.
To abort the uploading operation, press the C key.
The screen will switch back to the SYSTEM PA-
RAMETER transfer menu.