Denso BHT-100Q - Manual (Page 42)

26
⇓
⇓
Use the 5 key (or M1 or M2 key) to select the CALI-
BRATION line, then press the ENT key. The screen
shown at left will appear.
Touch the center of the "+" with the stylus. The
screen will switch to the following one.
To cancel adjustment and return to the main adjust-
ment screen, press the C key.
Touch the center of the newly displayed "+."
To cancel adjustment and return to the main adjust-
ment screen, press the C key.
Touch the center of the newly displayed "+."
To cancel adjustment and return to the main adjust-
ment screen, press the C key.
Adjusting the touch screen
At the first use of the touch screen or if the touch areas seem to deviate from the nor-
mal positions when in use, adjust the touch screen according to the steps given below.