Denso BHT-100Q - Manual (Page 26)

10
■ Using infrared link
Using infrared rays, the BHT may transfer data directly to the host computer equipped
with an IrDA interface port and other IrDA-compliant devices.
• Make sure that there is no obstruction in the light path between the BHT and any
target stations. In infrared communication, you need to keep the BHT and any
target stations within the effective infrared radiation range, usually 10 to 80 cm
(3.94 to 31.50").
• Shield the IrDA interface from direct sunlight, ambient intense lighting (inverter-
driven fluorescent lighting, in particular), and other potential sources of infrared
radiation. Sources to watch out for include remote control units for television sets
and the like.
For a host computer having no IrDA interface port, use the optical communications
unit CU-7000 (option) connected to the host via an RS-232C interface cable. Put the
BHT in the CU-7000 as shown below.
1.5 Transferring Data
Host computer
BHT
BHT
7 ABC 9 GHI 8 DEF
1 STU 3 2 VWX
0 ENT
4 JKL 6 PQR 5 MNO
PW BS C SF
M1 M2
7 ABC 9 GHI 8 DEF
1 STU 3 2 VW X
0 ENT
4 JKL 6 PQ R 5 MN O
PW BS C SF
M1 M2
YZ +
, / SP
YZ +
,/ SP