Formax 6200 (600) Series - Manual (Page 48)

When does your machine need to be cleaned?
Element Clogging symptoms Action
Feeder A, Band C The documents go through the machine
with difficulty.
Shift between feeder B and feeder C, jams. Procedure 1
Feeder E The envelopes go through the machine
with difficulty, jams. Procedure 2
Feeder D and F The documents go through the machine
with difficulty. Dummy double documents in
feeder D or F.
Folding and inserting
rollers Jams during insertion, folding significantly
askew. Letter not sealed properly. Procedure 3
Letter exit
roller Presence of water on the letter. Procedure 4
Preparation of the cleaning kit
Introduce the rod into the holes of the cleaning sheet.
Note: The same sheet can be used once for cleaning all the feeders.
3.1.1 Cleaning Procedure
- Switch off the machine,
- Switch on the machine and wait for twenty seconds,
- When the countdown appears under the machine diagram, Press on "ESC",
- Select "MAINTENANCE" and confirm by "OK",
- Empty all the feeders and confirm by "OK", in order to have access to the cleaning menu (Be sure to
check feeder F).
42