Formax 6200 (600) Series - Manual (Page 25)

3. DOCUMENT FEEDING
3.1 Document feeding in the manual mode (feeder A)
- Draw apart guides (5),
- Place the documents between the guides and adjust the guides to fit the width of the documents,
To start up the cycle:
- Put the document (with the address side facing upward and the top of the page on the right side),
- Push the document into the feeder entry, the machine will start immediately.
3.2 Document feeding in the automatic mode (feeders B and C)
- Avoid mixing in the same feeder documents of different qualities.
- In case of documents particularly difficult to process (uneven, smooth, rough or sticky), use
the half capacity of the feeder.
- Decollate the sheets by bending the stack of paper prior to placing it into the feeder,
- Align the edges of the stack by jogging it on a flat surface.
- To insert several sheets from the same feeder: place the sheets into the bin, in the reverse
order.
19