Formax 6200 (600) Series - Manual (Page 35)

1. TROUBLE SHOOTING
Note: In the event of an incident, the machine will trie to eject the document, in order to start
up again immediately. Consult the help option via "?" for further information.
Display / symptom Possible cause Solution
Error in the job selection. Select the appropriate job.
Jam in the inserting area (if the
fault occurs frequently). Job ill suited to the documents
handled. Check and/or adjust:
- the fold dimensions
- the alignment of the
documents from feeders B
and C
- the inserting position.
Envelopes or documents
are not up to specifications or
out of shape. If required, straighten manually
the document (envelope) shape.
Envelopes, inserts, reply
envelopes fed n the wrong
direction. See section B “Document
feeding”.
Envelope or document- guides
are not properly adjusted. See section B “Document
feeding”.
Rollers of feeders B, C, D, E, F
whether for insertion or folding,
are dirty. Clean the rollers of the insertion
and folding feeders. See
section C "Cleaning of the
rollers".
Insert path unlocked. See section C “Insert path”.
Jam in the document, insert or
envelope path (if the fault
occurs frequently). Document path unlocked. See section C “Document
path”.
Envelopes, inserts, reply
envelopes fed in the wrong
direction. See section B “Document
feeding”.
D o c u m e n t s ,
envelopes, inserts not
up to specifications or out of
shape. See section C
“Specifications”.
Jam in the document, insert or
envelope path (if the fault
occurs frequently). (contd.) Rollers of document, insert,
envelope feeder are dirty. See section C “Cleaning of the
rollers”.
29