Formax 6200 (600) Series - Manual (Page 3)

INTRODUCTION
The Formax 600 0 Series Folder/Inserters are designed to fold your documents, insert them into
envelopes and seal the envelopes. Small size documents may be inserted alone, without being
folded. They may also be added to larger folded documents. The machine operation is automatic,
quick and user-friendly. Folder/inserters can be used to send invoices, mailshots, payrolls, daily mail,
etc. The information provided in this manual will help you to optimize the functioning and output of
your machine.
Following are the folder/inserter main characteristics:
- One or two automatic feeders for large documents including 8 1/2" x 7", 8 1/2" x 11" and 8 1/2" x 14"
documents.
- Up to two automatic feeders (depending on the model) for small size documents (inserts smaller
than the main envelopes).
- One document manual feeder.
- Inserting documents into envelopes of various sizes including #10, #9 and 6" x 9" with or without a
window.
- Inserting into the same envelope various sheets from the same feeder, such as invoices printed on
several sheets.
- Stores up to 20 job applications for frequent or re-occuring mailings.
- Automatic adjustment of the folding dimensions.
- Adjustment assistance in the form of a simple and interactive control panel.
- Automatic detection of double documents on the automatic feeders.
- Automatic detection of double documents, based on the principle of electronic measurement of
the thickness insensitive to the paper opaqueness.
- Easy to use feeding system and simple jam clearing operations.
- Jam clearing assistance based on the control panel and the software functions.
- Compact with an appearance that fits easily in with the office environment.
STANDARD
In order to comply with standards EN60950 and UL1950, this equipment must be connected to
standard installations of the construction industry. As regards the protection of the internal
wiring, a two-pole protection is required against 5 Amp. current surges. This equipment is in
accordance with standard EN55022, Class A, EN55024, and FCC part 15.
INSTALLATION
The equipment should be installed very close to a grounded mains outlet easy of access and
protected by a 16 Amp. fuse.
CAUTION: NEVER REMOVE THE MACHINE COVERS.