Dolby Laboratories DP564 - Manual (Page 70)

DP564 Multichannel Audio Decoder Streaming Server and Remote Software
8-4
8.7 Dolby Streaming Server
The Dolby Streaming Server gives functionality to the computer where you store
Dolby Digital files you want to decode via the streaming input on your DP564.
Note: The DP564 only recognizes files that are stored in the directory defined when
you install the Streaming Server program.
8.7.1 Installing the Dolby Streaming Server
The Dolby Streaming Server software is provided on a CD-ROM.
CD-ROM Installation
To install the Dolby Streaming Server software:
1. Place the CD-ROM in the PC.
2. The installation program should run automatically. If nothing happens, open
the Run prompt (click the Start menu, then Run) and type
d:\setup.exe
(where d is the letter of your CD or DVD-Rom drive).
3. Follow the on-screen prompts during installation.
4. Use the default destination or select an alternate location for the software
installation.
8.7.2 Launching the Application
The Streaming Server has no user controls but it must be running prior to launching
the DolbyRemote 564. To launch the Streaming Server, double-click the Dolby
Streaming Server icon. You can also choose to have the Dolby Streaming Server
automatically launch when you start your computer by choosing that option when the
program is installed.
DolbyRemote 564 and Dolby Streaming Server can be run on a PC that meets these
minimum requirements:
• Windows 98, 2000, XP, NT4.0 or later
• 450 MHz Pentium III processor
• 128 MB RAM
• 200 MB available hard-drive storage (for server)
• 10 MB available hard-drive storage (for remote)
• Super VGA video card with 1024 × 768 resolution