Dolby Laboratories DP564 - Manual (Page 42)

DP564 Multichannel Audio Decoder Menus
4-16
To enter text:
1. Press ► to select
Del
, then
Enter
to delete the text to the left of the flashing
cursor.
When the letter characters appear uppercase, ↓ changes them to lowercase.
From the lowercase display, ↑ changes the letters to uppercase.
Space
inserts
a single character space,
Clear
erases the whole text entry field.
2. Press the arrow buttons to select a letter or symbol, then
Enter
.
The letter displays in the text entry field above the selection box.
3. When you have completed the entry, select
OK
and press
Enter
.
Unit Address
The unit address allows each DP564 to be uniquely identified when using the
software remote over a serial connection using either the
RS-232
or the
RS-485
connection. You can connect more than one to the same RS-485 link and control
them using one DolbyRemote 564, provided that each unit is assigned a unique
address. To change the unit address, enter the
Unit Address
menu, then use the
▲▼ buttons to change individual characters, and the ◄► buttons to move between
characters in the address. When you have the setting you need, press
Enter
.
Timecode Display
Use the
Timecode Display
menu to designate the timecode information to
display on the main status menu when processing a Dolby Digital signal. A separate
status menu,
Timecode Status
, displays all the available timecode information.
Screensaver Timeout
After a period of inactivity, the DP564 applies a screensaver to the display to preserve
display life. Use the
Screensaver Timeout
menu to set the period of inactivity
before the screensaver activates.
Screensaver Design
Use the Screensaver Design menu to choose between the Dolby logo and the unit
name when the DP564 activates the screensaver.
Network Settings
To activate the streaming audio input or to use the DolbyRemote 564 software by
network connection, you need to configure the DP564 using the
Network
Settings
menu.