Dolby Laboratories DP564 - Manual (Page 31)

DP564 Multichannel Audio Decoder Menus
4-5
4.3.6 Input Status
The input status menu identifies the selected input in the menu title line.
When a valid signal is present, information displays for signal lock, sample rate,
signal type, and
Emphasis
,
Bit-0
, and
Bit-1
informational bits.
Emphasis
reflects the setting of the channel status emphasis field in the input stream.
Bit-0
indicates a professional or a consumer stream, and
Bit-1
indicates whether the
stream is audio or non-audio.
When the selected input is not locked, the display shows only
Unlocked
.
If the
Streaming
input is active, the title line shows Streaming Status. The
informational lines are defined in Table 4-1.
Table 4-1 Input Status Display for Streaming Input
Item Display Information and What it Means
State No Input
A connection has not been established
with the Dolby Streaming Server.
No other items display in this state.
Stopped
Audio file and server is specified, but
audio is not being played. Playback starts
file from beginning.
Paused
Audio is paused. Playback starts from
pause point.
Buffering
Buffering data before playing the audio.
Playing
Audio file is playing.
Type Dolby Digital
Audio File playing is Dolby Digital.
Invalid Input
In
Stopped
or
Paused
state, input type
is not known.
File Shows the file name being played.
Packet Loss Shows number of packets lost since playback of this file
began.
Time Shows the time remaining in the current file.
Server Shows name of server from which the file is streaming.
4.3.7 AES Reference Input Status
This menu displays the lock status of the
AES Ref
input signal. When a valid signal is
present, the menu shows the sample rate.