Dolby Laboratories DP564 - Manual (Page 28)

DP564 Multichannel Audio Decoder Menus
4-2
4.2 Hot-Key Functions
Certain front-panel buttons activate a special function when you press and hold the
button for two seconds. We refer to that function as the hot-key function.
No matter what menu you are viewing, there are three front-panel buttons that display
the setup menu for that function when you press and hold the button for two seconds:
Pro Logic II
,
Custom
, and
Dim
. Holding
Custom
down is the only way to define the
parameters for custom compression scaling using the front-panel controls, but those
parameters are also adjustable using the DolbyRemote 564 software.
The
Preset
buttons have a different hot-key function. Holding down any
Preset
button for two seconds saves the current configuration but keeps the existing preset
name. To rename the preset, use the menus as described in Section 4.4.3, User
Presets.
Caution: When recalling presets 1–4 by pressing the Preset buttons, you must
release the button in less than two seconds, or that preset will reconfigure
to store the current settings.
4.3 Status Menu
The status menu includes these displays:
• Main status menu
• Output level meters
• Compression meters
• Monitor status
• Metadata status
• Input status
• AES reference input status
• Timecode status
• Error Statistics
• System Status
4.3.1 Main Status Menu
At power-up, the DP564 displays the main status menu. If there is no valid input, the
main status screen shows
No Input
.