Dolby Laboratories DP564 - Manual (Page 33)

DP564 Multichannel Audio Decoder Menus
4-7
Unit Setup
Operating Mode
Monitor Control
User Presets
I/O Control
Monitor Configuration
System Settings
Figure 4-5 Main Setup Menu
Scroll to select a menu item and press
Enter
or ► to display that item’s submenu. To
change a parameter value, enter the parameter adjustment menu, and press ▲ or ▼ to
adjust the parameter value. Press
Enter
to accept the new value selection and return to
the next higher menu level. To discard a new value selection and return to the next
higher menu level, press
Esc
or ◄.
Menus available within the setup menu are:
•
Operating Mode
•
Monitor Control
•
User Presets
•
I/O Control
•
Monitor Configuration
•
System Settings
Note: If you leave the display idle in any setup menu for five minutes or more, the
display changes to the main status menu.
4.4.1 Operating Mode
The
Operating Mode
menu includes these parameter adjustment menus:
•
Decode Format
•
Detection
•
Stream Select
•
AES3 Ch Sel
Decode Format
Decode Format
offers two options:
Automatic
and
Dolby Digital
.
Automatic
processes Dolby Digital signals and passes PCM signals through.
Dolby Digital
only processes Dolby Digital signals, and mutes any PCM input.