Dolby Laboratories DP564 - Manual (Page 65)

DP564 Multichannel Audio Decoder Using New Features
7-3
7.9 Timecode Output
The DP564 extracts the timecode from a Dolby Digital stream if timecode is present.
This is used to generate a matching linear timecode output signal from the rear-panel
LTC
connection. This can be used to synchronize external equipment, such as a
videotape machine, to follow the Dolby Digital bitstream. Details of timecode output
are discussed under Clock on page 4-14.
7.10 External AES Reference
You can lock the DP564 output to the studio reference clock by plugging the studio
reference to the
AES Ref
connector on the rear panel, and selecting either
Ref In
option on the
Clock
menu. Details on the
Clock
menu options are discussed on
page 4-14.
7.11 Ethernet Software Remote Control
You can control the DP564 using the DolbyRemote 564 software provided on the
CD-ROM included in the packing kit. This remote control software runs best via the
rear-panel
100BASE-T
connection.
For instructions on installing and using the DolbyRemote 564 software, see Chapter
8, Streaming Server and Remote Software.
7.12 Streaming
The DP564 processes streaming audio from the
100BASE-T
input. Control of the
features of streaming audio is available only when you use the DolbyRemote 564
software. For details, see Chapter 8, Streaming Server and Remote Software.
7.13 Karaoke
The DP564 provides a variety of options for decoding karaoke programs. These
options are controlled on the Karaoke menu, detailed on page 4-11.