Dolby Laboratories DP564 - Manual (Page 39)

DP564 Multichannel Audio Decoder Menus
4-13
viewing, but if you activate any preset using the
User Presets
menu, the display
goes to the main status menu upon activation.
Save Preset
Saving a preset stores every active setting. Be sure you have all parameters set
correctly, then enter the
Save Preset
menu and choose the preset number you
want to assign.
You can give each preset a name with up to 12 characters. Select the preset number
you want to assign, press
Enter
, and you see a text entry display, as shown in Figure
4-6. Figure 4-6 shows the display for Preset 1, but the preset number you see
corresponds to the preset number you choose to save.
A B C D E F G H I J K L M /
N O P Q R S T U V W X Y Z _
Ø 1 2 3 4 5 6 7 8 9 . : – ~
Save Preset 1
Preset 1
OK Del Space Clear
!
Figure 4-6 Save Preset Text Entry Screen
To enter text:
1. Press ► to select
Del
, then
Enter
to delete the text to the left of the flashing
cursor.
When the letter characters appear uppercase, ↓ changes them to lowercase.
From the lowercase display, ↑ changes the letters to uppercase.
Space
inserts
a single character space,
Clear
erases the whole text entry field.
2. Press the arrow buttons to select a letter or symbol, then
Enter
.
The letter displays in the text entry field above the selection box.
3. When you have completed the entry, select
OK
and press
Enter
.
4.4.4 I/O Control
The
I/O Control
menu includes these parameter adjustment menus:
•
Clock
•
IFE Mode
•
Monitor Out
•
Bypass
•
GPI/O Configuration