Dolby Laboratories DP564 - Manual (Page 32)

DP564 Multichannel Audio Decoder Menus
4-6
4.3.8 Timecode Status
The
Timecode Status
menu includes:
• A large timecode readout
• Frame rate
• Timestamp delay word
The main status display also shows timecode information, according to settings in the
Timecode Display
setup menu.
4.3.9 Error Statistics
When an error occurs, the front-panel
Error
LED is lit. The
Error Stats
menu
supplies more detailed information to help troubleshoot the problem. The top line
displays a quick identification of the type of error; press
Enter
with that line selected
to see a more detailed description. The other lines display dedicated error counts for
Dolby Digital CRC errors and AES coding, confidence, parity, and CRC errors. Press
Enter
with any of those items selected for more detailed information on that error.
Pressing
Enter
again resets the counter on that error type to zero.
4.3.10 System Status
The top line of this menu displays the current DP564 software version number. To
receive notification of software upgrades, register your product on the software
upgrades page at
www.dolby.com/download/softreg
.
The next lines show the current settings for IP address (
IP
), subnet mask (
Mask
),
default gateway (
Route
), and DNS server (
DNS
). Setup for these items can be
changed using the
Network Settings
menu. Highlight any of these menu items
and press
Enter
to see the full title and setting.
The final two lines in the System Status menu are informational displays showing
decoder latency and processing latency. Latency is discussed in Appendix B.
4.4 Setup Menu
Press
Setup
to view the main setup menu, shown in Figure 4-5.