Dolby Laboratories DP564 - Manual (Page 100)

DP564 Multichannel Audio Decoder Appendix C: Specifications
C-2
Digital Audio Outputs
Four BNC female connectors, unbalanced, 75
Ω per AES-3ID-1995 (SMPTE 276M)
Analog Audio Outputs
0 dBFS = +24 dBu; balanced floating; eight 3-pin male XLR connectors, 24-bit DAC
Headphone Output
+7 dBu maximum output into 50
Ω nominal; 1/4-inch standard stereo headphone jack;
level adjustable
Linear Timecode Output
One SMPTE 12M-1995, BNC female, unbalanced, nominal output signal 1 Vp–p,
output impedance 50
Ω
Serial Remote Control Input/Output
Front: RS-232, 8-pin female mini-DIN
Rear: RS-485, 9-pin female D-connector (SMPTE 207M)
General Purpose Input/Output (GPI/O) Port
37-pin female D-connector, TTL compatible, may be configured to be level or edge-
sensitive using either polarity
Ethernet Port
10/100BASE-T with auto-detection; RJ-45 female connector
Front-Panel Display
128
× 64 pixel vacuum fluorescent display (VFD)
Volume Controls
One large master volume control knob
One small headphone volume control knob
Downmix Modes
Lt/Rt, Stereo, Mono
Listening Modes
Full, 3 Stereo, Phantom
Compression Modes
Custom, Line, RF; Custom mode has adjustable parameters