Cat. no. 549 configuration, Button – Dolby Laboratories DP564 User Manual
Page 58
DP564 Multichannel Audio Decoder
Operating Modes
6-4
6.2.1
Cat. No. 549 Configuration
The
Cat.
No.
549 Config
menu allows you to customize functions controlled by
the Cat. No. 549 GPIO Controller. The initial display identifies which button is
selected for configuration, and the active settings for that button. An example is
shown in Figure 6-1.
Function
Pro Logic II
LED Sense
Normal
Cat.No.549 Config
Button
4
Figure 6-1 Cat. No. 549 Configuration Screen Showing Active Settings for Button 4
To change a configuration setting:
1. Press the front-panel arrow buttons to select a button or LED to configure.
The button selection moves according to the layout of the image on the
left-hand side of the display.
2. When you have selected a button to configure, press
Enter
to change the
property assignments.
The screen gives you a choice between
Function
and
LED Sense
, with
each showing the current assignment.
3. Select either option, choose the appropriate assignment, and press
Enter
.
4. When you have configured the button, press
Esc
to return to the
Cat.
No.
549 Config
menu, and repeat steps 1–3 as needed to configure
other buttons on the GPI/O Controller.
Table 6-1 shows the default assignments and the associated GPI/O pins for the Dolby
Cat. No. 549 GPI/O Controller.