ETA Mezo - Manual (Page 34)

After some time this staining usually goes away by itself. Never dry plastic moulded parts
above a heat source (e.g. fi re stove, electric/gas stove). Store the appliance thoroughly
cleaned in a dry, dust-free location that is out of reach of children and incapacitated persons.
Procedure for replacing a broken cog wheel
Remove the conveyor screw D1. Using an appropriate tool (e.g. a screwdriver) loosen the
screw. Remove the cog wheel D12 from the conveyor screw. Place a new cog wheel on
the conveyor screw shaft and fi rmly tighten with a screw (pic. 8).
vI. eNvIRoNMeNT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi ed on
the product or in the accompanying documentation mean that the used electrical or electronic
products must not be disposed of together with municipal waste. For proper disposal, hand
them over at the special collection places where they will be accepted free of charge. Suitable
disposal of the product can help to maintain valuable natural resources and to prevent
possible negative impacts on the environment and human health, which could be the possible
consequences of improper waste disposal. Ask for more details at the local authority or at
a collection site. Fines can be imposed for improper disposal of this type of waste in
agreement with the national regulations.If the appliance is to be put out of operation, after
disconnecting it from power supply we recommend its cutoff and in this way it will not be
possible to use the appliance again.More extensive maintenance or maintenance requiring
intervention in the inner parts of the appliance must be carried out by professional service!
Failure to comply with the instructions of the manufacturer will lead to expiration of the right to
guarantee repair!
vII. TeCHNICAl dATA
Voltage (V) Shown on the type label
Input power (W) Shown on the type label
Weight (kg) approx. 6,5
Volume of the stainless steel bowl (l) 4.5
Size of the product (mm) 34 x 12,5 x 33
Protection class of the appliance II.
Input in off mode is < 0,50 W.
The product has received ES declaration of conformity according to Act as amended.
The product matches the requirements of the below statutory order as amended.
– Committee Regulation No. 2006/95/ES as amended, setting the technical requirements
of the electrical appliance as low.
– Committee Regulation No. 2004/108/ES as amended, setting the technical requirements
of products in terms of their electromagnetic compatibility.
The product is in conformity with the European Parliament and European Committee
Regulation No. 1935/2004/ES re. Materials and objects designed for contact with food.
The manufacturer reserves the right for any insignifi cant deviations from the standard fi
nished product which do not have any effect on the functioning of the product.
CAUTION: Do not insert fingers into a sppliance NoTICe
34
GB
/ 54