ETA Mezo - Manual (Page 29)

Vents in the appliance ensure air circulation during ventilation and they must not be
covered or blocked in another way. Also, the legs must not be removed. Make sure that the
power cord is not damaged and that it does not lead any sharp or hot surfaces. The electric
socket must be easily accessible so that the oven can be easily disconnected from power
supply if danger appears. Choose the amount of the processed food so that the maximum
volume of the containers is not exceeded.
Food processor (A)
Assembly for operation (obr. 3, 4, 5)
Lift the multi-function head A7 up by pressing release lever A1. Fill the stainless steel bowl
B1 with food that is to be processed. Place the bowl on the food processor base A, press
on it and turn clockwise so that it locks in position on the base.
Select an appropriate attachment ( C1, C2 or C3) for your work, insert it into the mount A3
in the head turn it to lock it into position. Tilt the multi-function head A7 down to the work
position by pressing lever A1 and pressing head A7 downwards until it locks in, which is
accompanied by an audible click. Place the transparent cover B2 on the bowl B1 so that
the filling opening points turned in front of the head. Place filling funnel B3 on the filling
opening B2. Now the appliance is ready for operation.
Turning regulator (A2)
0 position: the appliance is off.
MIN position: the appliance is on.
● ●
●
– MAX position: it enables setting the optimum revolutions for the selected work
adapter.
Your foot processor is fitted with an electronic speed sensor control that is designed to
maintain the speed under different load conditions, such as when kneading bread dough
or when eggs are added to a cake mix. You may therefore hear some variation in speed
during the operation as the foot processor adjusts to the load and speed selected - this is
normal.
Application
The food processor is used to prepare various types of cake mixes, biscuits, pastry
doughs, icings, fillings, mashed potatoes, rising dough and so on. To prepare the
mentioned foods it uses beating or mixing whisks or a kneading hook. Insert the power
cord plug A8 into a power socket. Put the appliance into operation by turning the speed
dial A2 to one of the speed levels appropriate for processing your mix (see table). It is
possible to add to the mix during operation through the filling funnel B3. After fi nishing
processing, turn off the appliance by turning the dial to position 0. When disassembling
or changing the attachment proceed in the reverse sequence. Remove the stainless steel
bowl B1 by turning it anticlockwise so that the hooks in the food processor‘s base slide out
of the grooves on the sides of the bowl B1.
Recommendation
Mixing
Use beater C1 for light doughs, cake mixes, biscuits, icings, fillings, mashed potatoes,
etc. at a speed in the range Min to Max depending on the amount, type and quality of the
ingredients (see table). Never use beater C1 to knead heavy doughs!
29
GB
/ 54