Epiphan DVI2USB 3.0 - Manual (Page 76)

Advanced Topics
71
DVI2USB 3.0 User Guide
uploaded the custom EDID to the DVI2USB 3.0, the video source returned to
operating at 640x480.
14.2 Windows command line options
You can use the following command line options to control how the Windows video
capture application starts up. You can add as many command line options as you
want in any order. All command line options must start with two dashes. Separate
command line options with spaces.
--borderless Start the video capture application in image only mode.
You can press Esc to exit from image only mode.
--sn To specify which frame grabber to use if more than one
frame grabber is connected to the PC. Similar to the
Capture menu Select Device command.
is the serial number of the frame grabber.
--hs <#> Set the horizontal shift*.
--vs <#> Set the vertical shift*.
--phase <#> Set the sampling Phase*. The range is 0 to 31.
--pll <#> Set the PLL adjustment*.
--offset <#> Set the offset (brightness)*. The range is 0 to 63.
--gain <#> Set the gain (contrast)*. The range is 0 to 255.
--topmost To keep the video capture application window on top.
--fullscreen Start the video capture application in full screen mode.
“*” – Refer to the Configure device section for more details.