Epiphan DVI2USB 3.0 - Manual (Page 24)

Mac OS X Video Capture Workstation Installation
19
DVI2USB 3.0 User Guide
 Check the Windows Device Manager to verify that the frame grabber has
installed successfully and that the PC supports USB 3.0.
If, after following the installation steps, you are still having problems, close all
applications and restart the video capture workstation. When the video capture
workstation has started up, open the Windows Device Manager to confirm that the
frame grabber is detected.
6 Mac OS X Video Capture Workstation
Installation
Follow the step-by step procedures in this section if you are going to use a Mac as a
video capture workstation to view and record images captured by the frame grabber.
6.1 To Install the Mac Drivers and Application
A single download from the Epiphan web site includes the capture application
command line capture application (v2u), the DVI2USB 3.0 system preferences and the
QuickTime digitizer (vdig).
1. Find the latest Mac drivers and application software. Browse to
http://www.epiphan.com/products/dvi-frame-grabbers/dvi2usb-3-
0/downloads/
and scroll down to the Mac section of the download page.
2. Download the latest version of the drivers and application that will run on the
video capture workstation. Make sure you note the download destination
folder.
3. Double-click on the .dmg file to unpack it if it does not unpack automatically.
4. Double-click on the .pkg file and follow the prompts.
Note: The final step of the installation requires restarting the video capture
workstation.