Epiphan DVI2USB 3.0 - Manual (Page 39)

Windows Capture Application
34
DVI2USB 3.0 User Guide
device example if you are capturing audio from a built-in microphone,
choose microphone. If you are capturing video and audio from an
HDMI source, select HDMI In or Default Windows device, if you set
HDMI In as the Windows default.
Play captured
audio When enabled, captured audio is played on the video capture
workstation and is recorded. When disabled, audio is not played on
the video capture workstation, however it is recorded. Use this
setting to choose whether or not to play the audio while capturing.
Enable audio capture must be enabled for the Play captured audio
settings to take effect.
Configure
device You can view image adjustments for the selected device. You can
configure image adjustments from the Web admin interface or from
the Network Discovery Utility.
You can also select and configure VGA modes for the selected
device.
See the following section for more information regarding this
function.
9.5.5 Configure Device
This window allows you to perform various image adjustments and select a required
VGA mode. The following section illustrates and describes what can be configured
using which tab.