Epiphan DVI2USB 3.0 - Manual (Page 59)

Configuring DVI2USB 3.0 from the Control Panel
54
DVI2USB 3.0 User Guide
Figure 19 Frame grabber configuration
To edit the default configuration of the device:
1. Click the Default Configuration button. It is similar to the Tools > Options >
Configure command in the Epiphan Capture Tool.
2. Edit parameters.
3. After editing click OK and select the Use default configuration parameter
radio button to activate settings.
4. Click Close.
To maintain device-specific configuration:
1. Click the Configure Device… button. It is similar to the Tools > Options >
Configure command in the Epiphan Capture Tool.