Epiphan DVI2USB 3.0 - Manual (Page 35)

Windows Capture Application
30
DVI2USB 3.0 User Guide
9.4.4 To print a snapshot of the current image
You can use the following procedure to print the current image on any printer that is
connected to the video capture workstation. You can optionally pause the image
capture before printing an image.
1. Select Print from the File menu, select from the toolbar or use the key
combination CTRL+P. The current image is sent to the default printer. You
can select Print Setup from the file menu or use the key combination
CTRL+Shift+P to select a different printer and set printer options.
Note: You can also configure the application to invert colors for printing. From the
Tools menu select Options, then select the Display tab and select Invert colors for
printing. By reversing or inverting the colors of an image, the colors are made
complementary of the original value. After performing picture color inversion, black
becomes white, yellow becomes blue, red becomes aqua.
9.5 Menus
This section describes the commands available from the following Windows DVI2USB
3.0 user interface menus:
9.5.1 File Menu
Use the File menu commands to save and print the current image displayed by the
DVI2USB 3.0 user interface and to exit the DVI2USB 3.0 user interface.
Save Save a snapshot of the current image to a file on the video capture
workstation. Select a location for the file and select a file format. You
can save the snapshot as a bitmap (*.bmp), portable network graphics
(*.png), or JPEG (*.jpg) file.
The first time you select Save after starting the DVI2USB 3.0 user
interface, you are prompted for a file name and you can change the file