Getting started, 4 getting started – Epiphan DVI2USB 3.0 User Manual
Page 21
Getting Started
16
DVI2USB 3.0 User Guide
4 Getting Started
This chapter describes basic steps for installing drivers and the Epiphan capture
software, and connecting a DVI2USB 3.0 frame grabber to the video source and the
video capture workstation. The video capture workstation is a computer that runs the
drivers and Epiphan capture software and is used to display and record images and
audio captured by the DVI2USB 3.0 frame grabber.
Basic steps:
1. Review the Package Contents section
;
verify you received all items.
2. Review the System Requirements section
;
verify that your video capture
workstation will work normally with the frame grabber. The video capture
workstation can be running Windows, Mac OS, or Linux.
3. Install the Epiphan drivers and capture software for the DVI2USB 3.0 on the
video capture workstation. These procedures are specific to the workstation
OS and are explained in the following chapters.
4. Connect the DVI2USB 3.0 to the video source. Refer to
5. Connect the DVI2USB 3.0 to the video capture workstation. Refer to
6. Launch the capture software by clicking on the desktop icon.
7. Start capturing images.
5 Installing DVI2USB 3.0 on a video capture
workstation running Windows
Follow the step-by step procedures in this section if you are using a Windows PC as
the video capture workstation to view and record images and audio captured by a
DVI2USB 3.0 frame grabber.