Epiphan DVI2USB 3.0 - Manual (Page 44)

Windows Capture Application
39
DVI2USB 3.0 User Guide
Digital mode
detection
-
Automatic
-
Single Link
-
Dual Link
Sync level
adjustment Adjust sync level (HSync and VSync).
9.5.6 Tools Menu
Use the Tools menu to customize basic DVI2USB 3.0 user interface operating
settings.
Web Broadcasting Use this command to broadcast the captured signal, refer
to Chapter 5, Web Broadcasting, for more details.
Upload EDID to device Use this command to upload an extended display
identification data (EDID) file to your device.
Extended display identification data (EDID) is a data
structure provided by a digital display to describe its
capabilities to a video source. It is what enables a modern
personal computer to know what kinds of monitors are
connected to it. EDID is defined by a standard published
by the Video Electronics Standards Association (VESA).
Read EDID from device Use this command to read an extended display
identification data (EDID) file from the device.
Measure VGA Mode When requested by Epiphan technical support, you can
use this command to display low-level information about
the VGA mode that you are capturing with your frame
grabber. You can copy this information into an email to
send it to Epiphan technical support.
Options Configure video recording and display settings. See the
section, Capture, Record, and Display Options for more
information.