Epiphan DVI2USB 3.0 - Manual (Page 34)

Windows Capture Application
29
DVI2USB 3.0 User Guide
image currently displayed by the application to the video capture workstation
clipboard.
9.4.2 To copy a snapshot of the current image
1. Select Copy from the Edit menu or select from the toolbar. You can also
use the key combination CTRL+C. The current image is copied to the
clipboard.
2. Paste the image into a document or other application as a bitmap image. The
image is pasted as a device independent bitmap image.
9.4.3 To save a snapshot of the current image as an image file
You can use the following procedure to save the current image as a .bmp, .png, or .jpg
file on the video capture workstation. You can optionally pause the image capture
before saving an image.
1. Select Save from the File menu or from the toolbar select or use the
key combination CTRL+S. The status bar shows the location and name of
the saved file.
2. The first time you save an image, the Save As dialog appears and you can
specify the file name, file type, and location of the saved image file.
3. When you select Save again, the application saves the new image with the
same file name and location, overwriting the previously saved file. You can
select Save As to save the image with a different file name, file type, or
location or use the key combination CTRL+Shift+S.
4. You can open the saved image file with most bitmap image editing
applications.